
Clay brick color, protected and easy to rinse
Brick Paver Sealing in Winter Springs, FL
Keep brick color rich and joints full with a sealer matched to porous brick; call (689) 354-4715.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can I get brick paver sealing in Winter Springs, and how long until someone replies?
Brick paver sealing in Winter Springs, FL is available through a local contractor, and the reply comes within 1 business day, usually much sooner. The estimate is free and there is no pressure to book. To start, call (689) 354-4715.
Brick behaves differently from gray concrete pavers. It is porous, it carries a color worth keeping and it reacts to both harsh cleaners and hard pressure. A match between the sealer and the brick makes the difference between a deep, even tone and a cloudy one. Tell the contractor whether the brick is clay or concrete, and how old, when you get a free estimate.
What counts as a brick paver, and does it need a different sealer?
Brick pavers can be fired clay or concrete made to look like brick, and the sealer follows the material. Castle Clean and Seal says brick, travertine, concrete and natural stone each have different porosity levels. Kennelly Paver Sealing uses a water-based sealer on brick pavers and a clear impregnating product on travertine. A contractor who asks the material first is a good sign. To describe yours, call (689) 354-4715.
Why water-based works here
Castle Clean and Seal calls water-based sealer the professional standard in Florida because it lets moisture escape, and says a solvent product can turn white and peel in the humidity. Ask for the product name and its data sheet when you get a free estimate.
Concrete pavers that look like brick
Royal Blue Washing says concrete pavers are porous and benefit most from a joint-stabilizing sealer. If your brick look is poured concrete, the plan changes slightly, so say so when you call (689) 354-4715.
Is it safe to pressure wash brick pavers?
It is safe when the pressure is calibrated. Royal Blue Washing says brick and clay lose color under aggressive pressure, so it uses calibrated pressure and tests an inconspicuous spot first. Unilock advises a fan nozzle about 12 inches from the surface at a 30 degree angle so the sand stays in the joints. Hard blasting is the usual mistake. To ask how the contractor washes, get a free estimate.
Test spot first
A small corner or hidden strip gets cleaned, dried and checked before the rest of the brick. Royal Blue Washing says the test shows how the surface reacts. Ask to see it when you call (689) 354-4715.
Dry time before sealing
Brick must dry fully. Royal Blue Washing warns that sealing damp pavers can cause cloudy white haze, and Unilock says pavers need a few hours in warm sun or about 24 in shade. If a storm interrupts, the date slides, so get a free estimate.
What does brick paver sealing cost in Winter Springs?
Kennelly Paver Sealing lists the clean, sand and seal on brick pavers at $1.50 to $3.00 per square foot, which it puts at $750 to $3,000 for a typical 500 to 1,000 square foot job. Castle Clean and Seal's Central Florida range is the same. Size, old coating and mortar condition move it. For a number on your brick, get a free estimate.
No page found prices brick as a separate line from other pavers beyond that range, so the table also adds up the pieces one Central Florida washing company publishes: washing, resanding and sealing at $0.25, $0.75 and $1.80 per square foot. That comes to $2.80 together, inside the range. Stripping a failed coat runs $3.50 to $5.00 per square foot per Kennelly. For a quote comparison, call (689) 354-4715.
| Brick area | Clean, sand and seal at $1.50 to $3.00 | Washing, resanding and sealing as separate pieces at $2.80 |
|---|---|---|
| 300 sq ft | $450 to $900 | $840 |
| 500 sq ft | $750 to $1,500 | $1,400 |
| 800 sq ft | $1,200 to $2,400 | $2,240 |
| 1,000 sq ft | $1,500 to $3,000 | $2,800 |
The middle column is the $1.50 to $3.00 per square foot that Kennelly Paver Sealing lists for brick pavers, which it prices at $750 to $3,000 on a typical 500 to 1,000 square foot job. The last column adds the pieces a Central Florida washing company publishes: washing about $0.25, resanding about $0.75 and sealing about $1.80 per square foot, $2.80 together. Neither page prices a Winter Springs address, so these are regional figures, and Kennelly adds that brick quotes near $10 per square foot are likely from installation companies.

Which towns near Winter Springs can ask for brick sealing?
Estimates are open to Winter Springs and every town linked below, across Seminole, Orange and Volusia counties. Each page lists local notes. If your street is missing, call (689) 354-4715.
Which finish keeps brick looking like brick?
Pick the look first. Kennelly Paver Sealing lists wet look, matte and natural finishes for brick, and Unilock says a wet look deepens color and sheen while a natural matte finish preserves the original look. Red clay brick fades under UV, says Royal Blue Washing, so a coat that resists sun helps. To see samples dried on a spare paver, get a free estimate.
Natural
Closest to the unsealed brick. Quiet, easy to approve and the least slippery.
Matte
Slightly deeper tone without shine. A good choice near steps and a front door.
Wet look
Richest color and the most shine. Unilock cautions it can be slippery when wet.
What is the brick paver sealing process, step by step?
Brick takes a gentler path than concrete. Royal Blue Washing's order is to identify the material, test-clean, use calibrated pressure, dry fully, resand and match the sealer. A contractor adds a walk-through at the end. To book, call (689) 354-4715.
1. Identify the brick
Clay or concrete, old coating or none, loose pavers and mortar condition are checked.
2. Test a small spot
A hidden corner is cleaned and dried to see how the color responds.
3. Wash gently
Calibrated pressure and a fan nozzle clean the surface without emptying joints.
4. Resand
Dry sand is swept in, settled and topped off.
5. Dry fully
Moisture left in brick can cloud a coat, so the surface waits for dry weather.
6. Seal and walk it
A sprayer lays a water-based sealer, a roller evens it and the contractor names the keep-off time.
Weather window
Unilock asks for clear skies for 24 to 48 hours before and after, with temperatures from 50 to 90 degrees and 75 ideal. Summer storms in Winter Springs make the forecast the schedule. To plan around it, get a free estimate.

What causes the white haze on brick, and should I wait to seal?
The haze is efflorescence, natural salts rising to the surface as water moves through the brick. Unilock says it usually fades in two to three months and can take up to a year, and that new pavers should wait 60 to 90 days. Sealing too early traps it. If the brick is new, call (689) 354-4715.
Older brick with a cloudy coat
A cloudy older film can look the same. A contractor can tell them apart in one visit, so describe the spot when you get a free estimate.
A town that keeps building
Winter Springs grew from 33,282 people in 2010 to 38,342 in 2020, so new brick installs appear every season. New installs are the likeliest to carry haze. Call (689) 354-4715 to check yours.
How do old brick walks and mortar edges affect sealing?
A brick walkway with cracked mortar or loose edging needs repair before any coat. Royal Blue Washing says older brick walkways depend more on mortar and edge condition than on the brick face. Unilock adds that sealing is not a cure for subbase issues. Ask whether repairs are inside the quote when you get a free estimate.
Where the lawn meets the brick
JG Pro Pressure Wash says mildew builds where pavers meet grass, the spot that holds the most moisture. Those edges are treated before the sand goes in. Mention them when you call (689) 354-4715.
How often should Winter Springs brick pavers be resealed?
Plan on every two to five years. Kennelly Paver Sealing says two to four in Orlando, Pavers of Florida says two to three and Unilock says three to five. Royal Blue Washing adds that pavers can last about 30 years with maintenance and about 10 without. A cleaning every 12 to 15 months, per Kennelly, helps. To set a schedule for your brick, call (689) 354-4715.
What do sealed brick pavers look like around Winter Springs?








Frequently asked questions about brick paver sealing
How long does paver sealing last in Florida?
Two to four years is the Orlando range from Kennelly Paver Sealing, and Unilock says three to five. Brick in open sun lands near the short end. Royal Blue Washing says pavers can last about 30 years with maintenance and about 10 without, so the cycle matters more than any single coat.
How much is paver sealing in Florida?
Kennelly Paver Sealing lists brick pavers at $1.50 to $3.00 per square foot for the clean, sand and seal, and Castle Clean and Seal's Central Florida range is the same. A 500 square foot brick walk comes to about $750 to $1,500. Natural stone is priced higher, and stripping an old coat costs more again.
Is it a good idea to pressure wash pavers?
Yes, with limits. Brick and clay fade under UV and under aggressive pressure, says Royal Blue Washing, so it prefers calibrated pressure and a test spot first. Unilock advises a fan nozzle about 12 inches away at a 30 degree angle. Too much force empties the joints and scars the face.
Is there a downside to sealing pavers?
Yes. Sealing repeats every few years, a high-gloss coat can be slippery when wet, and a coat over damp brick can cloud. Royal Blue Washing says sealing damp pavers can leave a white haze, and Unilock adds a second coat laid too soon can leave a whitish film.
What is the average cost to seal pavers in Florida?
Two Orlando-area companies publish $1.50 to $3.00 per square foot for a full clean, sand and seal. For 800 square feet of brick that is about $1,200 to $2,400. Castle Clean and Seal keeps a $1,000 project minimum on small jobs.
How much does it cost to have your pavers sealed?
A brick patio of 500 square feet is about $750 to $1,500 at the Orlando range. A Central Florida washing company's separate pieces, $0.25 washing, $0.75 resanding and $1.80 sealing, add to $2.80 per square foot, so the same patio is near $1,400 on that count.
Should pavers be sealed in Florida?
Many homeowners choose to. Orlando gets more than 50 inches of rain a year, says Kennelly Paver Sealing, and Castle Clean and Seal cites humidity above 80 percent. Brick is porous, so a breathable water-based coat helps keep water and stains from soaking in.
What kind of sealer goes on brick pavers?
Kennelly Paver Sealing says brick pavers take water-based sealer, with finishes in wet look, matte or natural. Castle Clean and Seal says water-based products let moisture escape, while a solvent product can turn white and peel in Florida's humidity. Ask for the data sheet.
Does sealing hide the white haze on new brick?
No. That haze is efflorescence, natural salts rising to the surface, and Unilock says it usually fades in two to three months and can take a year. Sealing over it can lock it in. New pavers should wait 60 to 90 days, then be cleaned, dried and sealed.
Can an old brick walkway be sealed if the mortar is cracked?
The walkway needs the mortar and edges fixed first. Royal Blue Washing notes older brick walkways depend more on mortar and edge condition than on the brick face. Sealer cannot repair a loose bed, and Unilock says it is not a cure for base problems.
Will brick pavers keep their red color after sealing?
A wet look deepens the red and a natural finish stays close to the original shade, according to Unilock. Brick fades under UV, says Royal Blue Washing, so a coat that resists sun helps. Test a small area first to see how the shade turns out.
Ask what your Winter Springs brick needs
Describe the brick and the spot that worries you, and a local contractor replies within 1 business day, usually much sooner.
Free, no obligation
