Click To Call(689) 354-4715Click To Get A Free Estimate
Hand brush sweeping sand over a half-cleaned herringbone paver surface

Clean pavers and full joints, without the green film

Paver Cleaning and Joint Sand in Winter Springs, FL

Call (689) 354-4715 for a free estimate on cleaning and re-sanding your Winter Springs pavers.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 354-4715

Can I get my Winter Springs pavers cleaned, and how soon?

A local contractor cleans pavers in Winter Springs, FL, and you will hear back within 1 business day, usually much sooner. Fresh joint sand is part of the job, and the free estimate comes with no pressure to book. To start, call (689) 354-4715.

Cleaning takes off the algae, pollen film, leaf stains and rust that dull pavers, so the surface looks brighter and grips better underfoot. New sand then fills the joints, which steadies the pavers and leaves weeds less room. The back walk under the oaks that went dark last summer can match the rest of the yard again. A clean surface is also safer to walk on, since algae is what makes a damp paver slick. Point out the worst spots when you get a free estimate.

Call (689) 354-4715

Brush pushing sand over pavers where one side is clean and the other side is dark

What is part of a paver cleaning job?

A cleaning job covers stain treatment, a gentle wash and fresh joint sand after drying. Book it by itself, or treat it as the first half of a sealing job. Shady walks and the strip beside a sprinkler head take the longest. To line up a cleaning, call (689) 354-4715.

Stain treatment

A cleaner matched to the problem, whether algae, rust or tannin, goes on first and is tried on a small corner.

Gentle wash

A rotary surface cleaner gives an even pass at low pressure, without blasting sand out of the joints.

Fresh joint sand

Dry, clean sand is swept into every gap once the pavers have dried, then settled with water.

Sealer if you want it

A coat can go on after the surface dries completely. The sealing guide covers what it adds.

What are the signs my pavers need cleaning?

Watch for a green or black film in shady spots, brown leaf marks, orange streaks near sprinklers, weeds in the joints and sand on the driveway after rain. Algae matters most on a walk or pool deck, because a slick surface is a fall risk. To have yours looked at, call (689) 354-4715.

Is cleaning enough, or should I seal my pavers too?

A cleaning changes how pavers look today, while a sealer coat sets how long the change holds. Stopping at a cleaning costs less now, but the green and the stains return on their own schedule. A coat eases later cleanings, though it needs renewing every few years. Say whether you want one when you get a free estimate.

How often should Winter Springs pavers be cleaned?

An Orlando paver company recommends a maintenance cleaning every 12 to 15 months, and it says homes on that schedule get more life out of their sealer. Under heavy oak shade, or beside a sprinkler zone, a surface may need attention sooner than a sunny driveway. For a schedule built around your yard, call (689) 354-4715.

Does a harder blast clean pavers better?

No. Extra force empties the joints and can scar the face of softer pavers. Unilock says to keep the water at an angle no greater than 30 degrees so the joint material stays in place. A rotary surface cleaner held at a steady height, plus a cleaner matched to each stain, does more than raw pressure. When you get a free estimate, ask which machine and nozzle the contractor will bring.

Runoff matters as well. Plants, screens and door frames get covered first, and the rinse water should go toward a drain, not into a neighbor's yard. How a contractor answers tells you how careful the work will be. To ask about them now, call (689) 354-4715.

Shade

Why do pavers under Winter Springs oaks turn green and brown?

Shade keeps the surface wet, and wet is what algae wants. The city says Winter Springs has been a Tree City for 36 years, and UF/IFAS notes that live oaks never drop all their leaves, so something is always landing on the surface. Unilock lists tannins from trees among the organic stains on pavers. Booking a cleaning before the heavy summer rains keeps the result looking fresh longer. To plan one, call (689) 354-4715.

Rust stains

What are the orange marks near my sprinklers?

Most often it is iron. UF/IFAS explains that iron-rich well water stains whatever it lands on, plants included. A rust remover made for pavers lifts the stain, and sealer cannot go over it. Point out the marks when you get a free estimate.

What is the white film on my newer pavers?

A chalky white film on newer pavers is usually efflorescence, natural salts that rise to the surface. Unilock says it normally fades in two to three months and can take up to a year, and sealing should wait until it is gone. Clouded old sealer can look similar. Describe the spot when you call (689) 354-4715.

Surfaces

Which paved areas at a Winter Springs home can be cleaned?

Any paved surface at the house can be cleaned, including the driveway, pool deck, patio and front walk. Each collects a different kind of grime, so the cleaner and the method change. To start with yours, get a free estimate.

Driveways

Tires, oil drips and long hours of sun hit the driveway first. Cleaning a driveway pays off most where cars turn and the joints loosen.

Screened pool decks

Splash water, chlorine and bare feet wear on a pool deck every day. Cleaning one should leave it clean without making it slick.

Patios under the oaks

Back patios in shade stay damp and collect leaves, acorns and pollen. They usually take the most scrubbing.

Front walks and entries

Walks pick up soil, mulch and drips from planters. Cleaning the front walk is quick work, and it is the first thing guests step on.

Common problems

What leaves Winter Springs pavers dirty?

Oak shade, leaf stains, sand lost to rain, sprinkler rust and sun fading lead the list. Cleaning handles several of them, and sealing or repairs handle the rest. For the ones that apply to your house, call (689) 354-4715.

1. Green from oak shade

Shade keeps pavers wet long after the rain stops, and algae follows. The city says Winter Springs has been a Tree City for 36 years, so shaded driveways and north-facing walks are common. Left alone, the film turns slick.

2. Leaf and acorn stains

Fallen leaves leave brown marks. Unilock lists tannins from trees among the organic stains that cling to pavers, and a cleaner matched to the stain lifts them.

3. Sand lost to heavy rain

An Orlando paver company puts the area's rainfall at over 50 inches a year. Downpours carry sand out of the joints, the pavers start to shift and weeds move in.

4. Orange marks from sprinklers

According to UF/IFAS, iron is common in Florida well water, and it leaves rust on anything it sprays. A sprinkler head aimed at a driveway edge leaves orange streaks that need a rust treatment before any sealer.

5. Fading in open sun

A driveway with no shade takes sun from morning to evening, so unprotected color goes chalky first. A wash reveals the color still left, and a coat afterward helps keep it.

Pricing

What does paver cleaning cost in Winter Springs?

An Orlando paver company puts a standard pressure wash at roughly $0.15 to $0.75 per square foot. That puts an 800 square foot driveway near $120 to $600 and a 1,200 square foot pool deck near $180 to $900. Joint sand, rust treatment and repairs are usually priced apart, so compare what each quote includes. For a price on your property, get a free estimate.

Planning to seal as well? Ask for one combined price. Two Orlando-area companies publish $1.50 to $3.00 per square foot for the full clean, sand and seal. To compare the two prices side by side, call (689) 354-4715.

Thinking about a protective coat as well? The sealing guide explains it, and the service areas page lists every town near paver sealing in Winter Springs.

Paved areaWash onlyFull clean, sand and seal
400 sq ft$60 to $300$600 to $1,200
800 sq ft$120 to $600$1,200 to $2,400
1,200 sq ft$180 to $900$1,800 to $3,600

The wash column multiplies the $0.15 to $0.75 per square foot an Orlando paver company gives for a standard pressure wash. The last column uses the $1.50 to $3.00 per square foot that two Orlando-area companies published, read in November 2026. Large areas can price lower per foot, and your own quote may land elsewhere.

Get a Free Estimate

Lounge chairs and a pool inside a screen enclosure with paver decking ready for a wash
Why choose us

Why use a contractor who works around Winter Springs for paver cleaning?

A contractor who works here knows what oak shade, iron in sprinkler water and wet leaves leave behind. Compare the quote with the published rates on this page, then decide at your own speed. To begin, get a free estimate.

A contractor who works nearby

Winter Springs sits under a heavy oak canopy, and a contractor who covers it has dealt with the shade, the leaf drop and the afternoon storms. That makes the first visit more useful.

A free look and a written number

The visit and the estimate are free. If the price does not suit you, say thanks and move on.

Prices you can check first

Two Orlando-area paver companies publish $1.50 to $3.00 per square foot, and this site shows the same range. If a quote lands well outside that range, ask what it leaves out.

You set the pace

Get the price in writing and take the time you want. Before you sign, run through the checklist on the contractor standards page.

Want a free estimate to clean your Winter Springs pavers?

Use the form or phone in, and a contractor answers within 1 business day, usually much sooner.

Call (689) 354-4715

Free, no obligation

Contractor explaining a cleaning plan to an older couple beside a paver walk and a stucco house
Photos

What do cleaned pavers look like around Winter Springs?

Sealed herringbone paver driveway at a ranch home under a live oak on a Winter Springs street
Sealed paver pool deck inside a tall screen enclosure on a Winter Springs street
Sealed paver patio beside a screened porch overlooking a lake on a Winter Springs street
Sealed paver front walkway with a brick border to a two-story home on a Winter Springs street
Close view of sealed pavers with tight sand joints on a Winter Springs street
Paver driveway with one cleaned half beside a stained half on a Winter Springs street
Contractor running a surface cleaner over a paver driveway on a Winter Springs street
Two contractors spraying and rolling sealer on a driveway on a Winter Springs street
How it works

What is the paver cleaning process in Winter Springs, step by step?

When no sealer is booked, the visit stops after step four with the joints full. To set a date, call (689) 354-4715.

1. Measure and walk the area

The contractor measures the paved area for the cleaning quote and notes low spots, loose pavers, old coating and anywhere water collects.

2. Cover and wash

Plants, screens and door frames get covered and the sprinklers go off. A rotary surface cleaner washes the pavers in sections at a pressure that leaves the joint sand in place.

3. Treat what is left

Algae, rust and tannin stains each get a cleaner made for them, tried on a small corner first.

4. Refill the joints

Once the pavers have dried, joint sand is swept in, settled with water and topped off, and the extra is blown clear.

5. Seal and walk it with you

When sealer is part of the job, a sprayer lays it down and a roller evens it out. Last, the contractor walks the finished area with you and says how long feet and cars should stay off it.

Questions

Frequently Asked Questions

How do you get pavers clean?

A contractor treats algae and stains first, then washes in sections with a rotary surface cleaner at low pressure. Unilock says to keep the water at an angle no greater than 30 degrees so the joint material stays put. Fresh sand goes in once the pavers dry.

What cleaner works on driveway pavers?

It depends on the stain. Algae, tannin from leaves and rust each respond to a different cleaner, and a gentle product made for pavers is safer than a harsh one. A contractor tries the cleaner on a small corner first, then treats the rest.

How often do you seal pavers in Florida?

Every two to five years for most homes. An Orlando paver company says two to four, and Unilock gives three to five. A cleaning between coats, every 12 to 15 months by the Orlando company's advice, keeps buildup from wearing the coat down.

How much is paver sealing in Florida?

Two Orlando-area companies publish $1.50 to $3.00 per square foot for cleaning, joint sand and sealer together. A 600 square foot driveway comes to about $900 to $1,800. Stripping an old failed coat adds to that.

Is there a downside to sealing pavers?

Yes. It is a repeat cost, and a high gloss coat can get slippery when wet. Cleaning alone avoids both, though it adds no protection, so the green and the stains return on their own schedule.

How much does paver cleaning cost in Winter Springs?

An Orlando paver company puts a standard pressure wash at roughly $0.15 to $0.75 per square foot. An 800 square foot driveway would run about $120 to $600 at that rate. Joint sand, rust treatment and repairs are usually priced apart.

Why do my Winter Springs pavers turn green under the oaks?

Shade and humidity keep the surface damp, and damp is what algae needs. The city has been a Tree City for 36 years, so shade is hard to avoid.

Should pavers be cleaned before sealing?

Yes. Unilock says to make sure pavers are spotless first, or the sealer can make stains stand out. Algae, dirt and old residue get locked under the coat if they stay.

Will cleaning remove orange sprinkler stains?

Often, with the right treatment. UF/IFAS says most Florida well water is high in iron and leaves rust deposits, and a rust remover made for pavers lifts it. It has to come off before sealing, and old, deep marks may only fade.

Pick a day to freshen your Winter Springs pavers

Reach out by form or phone, and a local contractor gets back within 1 business day, usually much sooner.

Call (689) 354-4715

Free, no obligation