Click To Call(689) 354-4715Click To Get A Free Estimate
Brick red paver driveway with a clean apron in front of a garage and a magnolia

Tires, oil and sun meet your pavers daily

Driveway Paver Sealing in Winter Springs, FL

Give a faded driveway its depth back, and call (689) 354-4715 for a free written estimate.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 354-4715

Is driveway paver sealing available across Winter Springs, and how fast is the reply?

Yes, driveway paver sealing is available across Winter Springs, FL, and a local contractor replies within 1 business day, usually much sooner. The visit and the written price are free, and the choice stays with you. To begin, call (689) 354-4715.

Look at the drive after a wet August. The middle has dulled, the edges by the lawn are dark, and the joints have thinned where the tires turn. A cleaned, re-sanded and sealed surface brings the color back and gives oil drips less chance to soak in. Tell the contractor where cars park and where the sprinklers hit when you get a free estimate.

Call (689) 354-4715

Does a paver driveway need sealing in Florida?

It does not have to be sealed, though it is the paved area that works hardest. Castle Clean and Seal lists vehicle traffic, oil stains and sun exposure as the main wear, and Unilock says a sealer helps protect pavers from water, dirt, oil and stains. Skipping the coat is not a disaster, only a faster cycle of cleaning and re-sanding. To compare both paths, call (689) 354-4715.

What the coat is for

The coat holds joint sand in, slows color fade and keeps oil near the surface so it can be treated. Those are maintenance gains, not repairs. For a driveway that already has loose pavers, Unilock says sealing is not a cure for drainage or base problems. To check yours, get a free estimate.

When a new driveway should wait

A driveway laid this year should hold off. Unilock says efflorescence can take two to three months and sometimes a year to clear, and new pavers wait 60 to 90 days. Share the install date when you ring (689) 354-4715.

Pricing

What does driveway paver sealing cost in Winter Springs?

Castle Clean and Seal lists driveways of 600 to 1,200 square feet at $1.50 to $2.50 per square foot, which makes about $900 to $3,000 on its page. Kennelly Paver Sealing gives $1.50 to $3.00 for a clean, sand and seal. Bigger drives usually come in lower per foot, and a $1,000 project minimum is common. For a figure on your own drive, get a free estimate.

Old coating raises the price. Kennelly Paver Sealing lists stripping and resealing at $3.50 to $5.00 per square foot over two to three days, and Castle Clean and Seal says stripping usually adds $500 to $1,000 or more. A flat bid near $500 for a whole driveway, Castle warns, may mean one thin coat of cheap solvent product with no prep. To test a quote you hold against these, call (689) 354-4715.

Driveway sizeTypical layoutClean, sand and seal at $1.50 to $2.50Strip and reseal at $3.50 to $5.00
600 sq ftTwo cars side by side$900 to $1,500$2,100 to $3,000
900 sq ftTwo cars plus a turn pad$1,350 to $2,250$3,150 to $4,500
1,200 sq ftLong drive with apron and walk$1,800 to $3,000$4,200 to $6,000

Castle Clean and Seal lists driveways of 600 to 1,200 square feet at $1.50 to $2.50 per square foot, and its page puts a 1,200 square foot drive nearer $1.50. Kennelly Paver Sealing lists stripping a failed coat and resealing at $3.50 to $5.00. Both are Orlando-area companies and neither prices a Winter Springs street by name. Your own quote may differ.

Why a rock-bottom bid is a warning

Kennelly Paver Sealing says a bid near $0.40 per square foot points to skipped cleaning, sanding or a weak sealer. Castle Clean and Seal says cheap no-name sealers break down in 6 to 12 months under sun. Ask what the low number leaves out when you get a free estimate.

Get a Free Estimate

Long herringbone paver driveway curving past a live oak toward a two-car garage

What happens to the cars on sealing day?

Cars come off the driveway before work starts, as Kennelly Paver Sealing notes, and they stay off until the coat is ready. Castle Clean and Seal says foot traffic waits at least four to six hours and vehicles at least 48. Park on the street or at a neighbor's with permission, and ask about the exact window. To plan the days, call (689) 354-4715.

If you have one car and one garage

Garage cars can stay inside only if the door path is clear of wet sealer, so contractors often work in halves. Ask whether the job is split in two parts when you get a free estimate.

Guests and delivery trucks

A fresh coat and a heavy delivery truck do not mix. Schedule big deliveries before or after the two-day window, and call (689) 354-4715 if the date slides for rain.

Which towns near Winter Springs can ask for driveway sealing?

Driveway estimates are open to Winter Springs and every town linked here, from Casselberry to Orange City. Living on a street the list skips? A quick call to (689) 354-4715 settles it.

How do I get oil, tire marks and sprinkler rust off a driveway first?

A coat should never go over a stain, so treatment comes first. Oil, tire marks, rust and leaf tannin each get a cleaner made for that mark, tried on a small corner, and the driveway is washed afterward. A contractor does this as part of the quote, and a stubborn stain may only fade. To point out your worst spots, get a free estimate.

Rust from sprinklers and fertilizer

UF/IFAS says iron above about 0.3 parts per million causes staining and scaling, and that iron sulfate fertilizer leaves reddish-brown marks on driveways that are hard to remove. Aim sprinklers off the edge and tell the contractor when you call (689) 354-4715.

Dark edges where pavers meet grass

JG Pro Pressure Wash says mildew builds along driveway edges where pavers meet the lawn, the spot that holds the most moisture. Those edges get extra treatment before sand goes in. Mention them when you get a free estimate.

How it works

What is the driveway sealing process, step by step?

A standard job runs in one day, per Kennelly Paver Sealing, with stripping stretching to two or three. Here is the order. For a booking, call (689) 354-4715.

1. Walk and mark

Oil, rust, loose pavers, drainage and the lawn edge are noted before a price is set.

2. Pre-treat stains

Each stain gets its own cleaner, and weeds and mold in the joints are treated.

3. Wash and rinse

A surface cleaner works in sections at low pressure while runoff is kept off the street where possible.

4. Fill the joints

Dry sand is swept in and settled, then the extra is removed.

5. Let it dry

Unilock says pavers dry in a few hours in warm sun and about 24 in cool shade.

6. Spray and roll the sealer

A sprayer saturates the pavers and a dry roller removes extra, per Unilock.

7. Walk it with you

The contractor names the time before feet, cars and sprinklers return.

Sprinklers off, sealer dry

Unilock says to shut off automatic sprinklers while the coat cures, since water can leave white marks or get trapped under it. Set a reminder, and call (689) 354-4715 if the timer cannot be paused.

Brush sweeping dry sand into the joints beside a freshly cleaned stretch of driveway

How long does driveway paver sealer last in Winter Springs?

Two to four years is the Orlando range from Kennelly Paver Sealing, and Unilock says three to five. A south-facing driveway in full sun with daily traffic may need attention around every two years, Kennelly adds, while a shaded drive sits longer. A maintenance cleaning every 12 to 15 months helps a coat last. To fit a schedule to your drive, get a free estimate.

Sun side versus shade side

Open sun fades color and wears the coat. Oak shade keeps it longer but grows algae, so cleaning matters more. Say which side yours is when you call (689) 354-4715.

Does sealing a driveway change what the HOA sees from the street?

It can. A wet look deepens color and adds shine, and a natural finish stays close to the original look, per Unilock. A board that has rules on exterior appearance may care which one you choose. Ask the association before you book, and a contractor can show a sample of each when you get a free estimate.

Choose a finish for rain

Unilock warns that high-gloss sealers can be slippery when wet, and matte is the safer option. On a sloped driveway after a summer storm, that matters. To compare samples, call (689) 354-4715.

Will sealing fix a driveway that holds water or sinks?

No. Unilock says sealing is not a cure for poor drainage or subbase issues, so sunken tire tracks and puddles need leveling first. The city's flood page offers a FEMA floodplain map by address if water is a larger worry. When you get a free estimate, ask if leveling is in the price or separate.

Cloudy or white patches afterward

Unilock says a whitish film comes from trapped moisture or a second coat laid too soon. Rain inside 48 hours is the usual cause. Call (689) 354-4715 if a haze appears.

Photos

What do sealed driveways look like around Winter Springs?

Sealed herringbone paver driveway at a ranch home under a live oak along a Winter Springs driveway apron
Sealed paver pool deck inside a tall screen enclosure along a Winter Springs driveway apron
Sealed paver patio beside a screened porch overlooking a lake along a Winter Springs driveway apron
Sealed paver front walkway with a brick border to a two-story home along a Winter Springs driveway apron
Close view of sealed pavers with tight sand joints along a Winter Springs driveway apron
Paver driveway with one cleaned half beside a stained half along a Winter Springs driveway apron
Contractor running a surface cleaner over a paver driveway along a Winter Springs driveway apron
Two contractors spraying and rolling sealer on a driveway along a Winter Springs driveway apron
Questions

Frequently asked questions about driveway paver sealing

Does a paver driveway need to be sealed?

It does not have to be, but it is the paved area that takes the most abuse. Castle Clean and Seal names vehicle traffic, oil stains and sun exposure as the usual wear. Unilock says a sealer helps protect pavers from water, dirt, oil and stains. A driveway with no coat can still look good for a time, and then the joints and color tend to go together.

How long does paver sealing last in Florida?

Two to four years is the Orlando range from Kennelly Paver Sealing. It says a south-facing driveway in full sun with daily vehicle traffic may need attention around every two years. Unilock puts the general figure at three to five, and Pavers of Florida at two to three.

What is the average price for paver sealing?

Castle Clean and Seal lists driveways at $1.50 to $2.50 per square foot, usually 600 to 1,200 square feet, so about $900 to $3,000. Kennelly Paver Sealing gives $1.50 to $3.00 for a typical clean, sand and seal. Stripping a failed coat first costs more, and a flat bid near $500 for a whole drive is called a red flag.

Which cleaner works on driveway pavers?

It depends on what is on the surface. Oil, algae, rust and leaf stains each respond to a different product, and a contractor tries it on a small corner before treating the rest. Unilock says to hold a fan nozzle about 12 inches away at a 30 degree angle for pressure washing so the joints keep their sand.

What is the average cost to seal pavers in Florida?

Two Orlando-area companies publish $1.50 to $3.00 per square foot for the whole clean, sand and seal. For a 600 square foot driveway that is about $900 to $1,800. Castle Clean and Seal keeps a $1,000 project minimum, so a small walk on its own may cost more per foot.

Can I drive on my pavers right after sealing?

Not yet. Castle Clean and Seal says foot traffic waits at least four to six hours and cars at least 48 hours. Kennelly Paver Sealing says water-based sealer is fully cured in 24 to 48. Your contractor names the exact time, and the cars usually stay on the street until then.

Will sealing stop oil stains on my driveway?

It slows them. Unilock says a sealer helps protect the surface from oil, and a coat gives drips less chance to soak in. It does not make the drive stain proof, so fresh drips should still be wiped up. Old stains are treated before the coat, not covered by it.

How do I get rid of orange sprinkler stains before sealing?

A rust treatment made for pavers lifts most of them, and it has to happen before the coat goes on. UF/IFAS says iron above about 0.3 parts per million is enough to cause staining and scaling. After the stain is gone, aiming the sprinkler heads away from the edge keeps it from returning.

What does a Winter Springs HOA think about a glossy driveway?

Ask the association before choosing a finish. A move from natural to a wet look changes how the drive looks from the street, and many boards want to review it. A natural or matte finish stays closest to the original color and is easier to approve.

How long does a driveway sealing job take in Winter Springs?

Kennelly Paver Sealing says a standard job finishes in one day and stripping a failed coat takes two to three. JG Pro Pressure Wash says most single driveways take one day for the cleaning and sanding, with sealer after the surface is dry. Afternoon storms in summer can move the date.

Want a price on sealing your Winter Springs driveway?

Share your street and the stain that bothers you, and a local contractor answers within 1 business day, usually much sooner.

Call (689) 354-4715

Free, no obligation